<?php

/*
 * Starter sample for OpenType font features
 *
 * Demonstrate various typographic OpenType features after checking
 * whether a particular feature is supported in a font.
 *
 * Required software: PDFlib/PDFlib+PDI/PPS 10
 * Required data: suitable font with OpenType feature tables
 *
 * This sample uses a default font which includes a various features.
 * Depending on the implementation of the features you
 * may have to replace the sample text below.
 *
 */


/* This is where the data files are. Adjust as necessary. */
$searchpath = dirname(__FILE__,3)."/input";
$outfile = "";

$llx = 50;
$lly = 50;
$urx = 800;
$ury = 550;

/* This font will be used unless another one is specified in the table */
$defaulttestfont = "NotoSerif-Regular";

$header = array(
    "OpenType feature",
    "Option list",
    "Font name",
    "Raw input (feature disabled)",
    "Feature enabled"
);
$MAXCOL = 5;

$testcases = array(
array(
  "description"=>"ligatures",
  "fontname"=>"",
  "feature"=>"liga",
   "text"=>"ff fi fl ffi ffl"
),
array(
  "description"=>"discretionary ligatures",
  "fontname"=>"",
  "feature"=>"dlig",
   "text"=>"ch tz"
),
array(
  "description"=>"small capitals",
  "fontname"=>"",
  "feature"=>"smcp",
   "text"=>"PostScript"
),
array(
  "description"=>"ordinals",
  "fontname"=>"",
  "feature"=>"ordn",
   "text"=>"1o 2a 3o"
),
array(
  "description"=>"fractions",
  "fontname"=>"",
  "feature"=>"frac",
   "text"=>"1/2 1/4 3/4"
),
array(
  "description"=>"slashed zero",
  "fontname"=>"",
  "feature"=>"zero",
   "text"=>"0"
),
array(
  "description"=>"historical forms",
  "fontname"=>"",
  "feature"=>"hist",
   "text"=>"s"
),
array(
  "description"=>"proportional figures",
  "fontname"=>"",
  "feature"=>"pnum",
   "text"=>"0123456789"
),
array(
  "description"=>"old-style figures",
  "fontname"=>"",
  "feature"=>"onum",
   "text"=>"0123456789"
),
array(
  "description"=>"lining figures",
  "fontname"=>"",
  "feature"=>"lnum",
   "text"=>"0123456789"
),
array(
  "description"=>"superscript",
  "fontname"=>"",
  "feature"=>"sups",
   "text"=>"123"
),
array(
  "description"=>"subscript",
  "fontname"=>"",
  "feature"=>"subs",
   "text"=>"H2SO4"
)
);
$n_testcases = 12;

try {
    $p = new PDFlib();

    $p->set_option("searchpath={" . $searchpath . "}");
    $p->set_option("charref=true");

    /* This means that formatting and other errors will raise an
     * exception. This simplifies our sample code, but is not
     * recommended for production code.
     */
    $p->set_option("errorpolicy=exception");

    /* Set an output path according to the name of the topic */
    if ($p->begin_document($outfile, "") == 0) {
        echo("Error: " . $p->get_errmsg());
        exit(1);
    }

    $p->set_info("Creator", "PDFlib starter sample");
    $p->set_info("Title", "starter_opentype");

    $table = 0;

    /* Table header */
    for ($row=1, $col=1; $col <= $MAXCOL; $col++)
    {
        $optlist = sprintf(
       "fittextline={fontname=NotoSerif-Bold fontsize=12} " .
       "margin=4"
       );
        $table = $p->add_table_cell($table, $col, $row, $header[$col-1],
                $optlist);
    }

    /* Create a table with feature samples, one feature per table row */
    for ($row=2, $test=0; $test < $n_testcases; $row++, $test++)
    {
        /* Use the entry in the test table if available, and the
         * default test font otherwise. This way we can easily check
         * a font for all features, as well as insert suitable fonts
         * for individual features.
         */
        if ($testcases[$test]["fontname"] != "")
            $testfont = $testcases[$test]["fontname"];
        else
            $testfont = $defaulttestfont;

        $col=1;

        /* Common option list for columns 1-3 */
        $optlist = sprintf(
        "fittextline={fontname=NotoSerif-Regular fontsize=12} " .
        "margin=4");

        /* Column 1: feature description */
        $table = $p->add_table_cell($table, $col++, $row,
            $testcases[$test]["description"], $optlist);

        /* Column 2: option list */
        $buf = sprintf( "features={%s}", $testcases[$test]["feature"]);
        $table = $p->add_table_cell($table, $col++, $row, $buf, $optlist);

        /* Column 3: font name */
        $table = $p->add_table_cell($table, $col++, $row, $testfont,
                $optlist);

        /* Column 4: raw input text with  feature disabled */
        $optlist = sprintf(
             "fittextline={fontname={%s} fontsize=12 " .
             "} margin=4", $testfont);
        $table = $p->add_table_cell($table, $col++, $row,
                $testcases[$test]["text"], $optlist);

        /* Column 5: text with enabled feature, or warning if the
         * feature is not available in the font
         */
        $font = $p->load_font($testfont, "unicode", "");

        /* Check whether font contains the required feature table */
        $optlist = sprintf( "name=%s", $testcases[$test]["feature"]);
        if ($p->info_font($font, "feature", $optlist) == 1)
        {
            /* feature is available: apply it to the text */
            $optlist = sprintf(
                 "fittextline={fontname={%s} fontsize=12 features={%s}} margin=4",
                 $testfont, $testcases[$test]["feature"]);
            $table = $p->add_table_cell($table, $col++, $row,
               $testcases[$test]["text"], $optlist);
        }
        else
        {
            /* feature is not available: emit a warning */
            $optlist = sprintf(
                 "fittextline={fontname=NotoSerif-Regular " .
                 "fontsize=12 fillcolor=red} margin=4");
            $table = $p->add_table_cell($table, $col++, $row,
                    "(feature not available in this font)", $optlist);
        }

    }

    /*
     * Loop until all of the table is placed; create new pages as long
     * as more table instances need to be placed.
     */
    do {
        $p->begin_page_ext(0, 0, "width=a4.height height=a4.width");

        $optlist = "header=2 fill={{area=rowodd fillcolor={gray 0.9}}} "
            . "stroke={{line=other}} ";

        /* Place the table instance */
        $result = $p->fit_table($table, $llx, $lly, $urx, $ury, $optlist);

        if ($result == "_error")
            throw new Exception("Couldn't place table: "
                . $p->get_errmsg());

        $p->end_page_ext("");

    }
    while ($result == "_boxfull");

    $p->end_document("");

    $buf = $p->get_buffer();
    $len = strlen($buf);

    header("Content-type: application/pdf");
    header("Content-Length: $len");
    header("Content-Disposition: inline; filename=starter_opentype.pdf");
    print $buf;
}
catch (PDFlibException $e) {
    echo("PDFlib exception occurred in starter_opentype sample:\n" .
        "[" . $e->get_errnum() . "] " . $e->get_apiname() . ": " .
        $e->get_errmsg() . "\n");
    exit(1);
}
catch (Throwable $e) {
    echo($e);
    exit(1);
}

$p = 0;
?>